The Combination Wet And Dry Vacuum Cleaner

The wet/dry vacuum cleaner combination is no- A wide set of wheels will help to prevent the
longer just for a workshop. Over the years, thevacuum from tipping over.
driving technology has improved a great deal,- There are some of the larger models that have
deceasing the loud screeching noises that thethe ability to convert to a leaf blower, which is
vacuums were so very well known for.great if you have a lot of trees in your yard.
When you go out to buy a wet/dry vacuum with- Some wet/dry models have a built in pump
both wet and dry features, you'll need to knowattachment as well. This type of attachment will
some of the details. The vacuums are available inallow the water to be pumped through a garden
a variety of different sizes and HP, ranging fromhose that attaches to the vacuum.
6 - 22 gallons and 1.5 - 10.5 HP. The capacity of- A handy drain valve or sprout will make
the wet/dry vacuum should match your needs inemptying the vacuum cleaner a snap. If it doesn't
the following ways:have this feature, you'll have to remove the lid
1. Wall mount vacuum cleaners with 1.5 HP and a 1and tip the vacuum to the side to empty all of
gallon tank are available for quick and easythe water. Depending on how much water you
cleanup jobs, such as spills. You can also hang thishave in the tank, you could easily and accidentally
type on the wall as well, which will keep it out ofspill it on the floor. The smaller types of wet/dry
your way.vacuums normally don't have a spout or drain
2. The six gallon vacuum cleaners are ideal foroption.
smaller jobs and are easy to maneuver and store- Wider hoses and floor nozzles are great to have
than a larger model. Keep in mind however, thatas well. The wider the hose and nozzle are, the
the smaller wet/dry cleaners are much louder andless likely the vacuum will be to clog up on you.
also more prone to tipping over. The smaller theIf they aren't provided with the vacuum you
tank, the more often you will have to stop anddecided on, you can also purchase the following
empty it.attachments:
3. Higher capacity models are recommended if1. Crevice tool - this handy tool will easily get in
you have a workshop or garage where largertight corners and around floor edges.
spills occur. A large capacity tank will decrease the2. Extension wand - this will make the hose longer
number of times that you have to empty thefor hard to reach areas.
tank.3. Hose couplings - this will join the extension
When you looking for the best wet/dry vacuumwand to the hose.
for you, you should look for the following options4. Combination nozzle - this helps to alleviate the
and features:          - The pleated cartridgeneed of switching nozzles before you switch
filter. It is reusable and rinseable, and providesfunctions.
more filtration area than the flat filter and it5. Gulper nozzle - this tool is ideal for the wet
doesn't need to be removed when you switchvacuum function.
from the dry to wet vacuum function.6. Round brush - this nifty little tool is ideal for
- An automatic shut off device is available withscrubbing.
most newer vacuum cleaners. This mechanism will7. Cleaning kit - this kit will include everything you
shut off the motor automatically once the tankneed to clean delicate upholstery and other areas
has become full of water, which will prevent itas well.
from overflowing.